Jack with a "useful" amount of water fall gear on his harness.Once you know you'll lose gear it is time to figure out a plan on how not to lose gear. I think this topic is as important as any I have written about here to date.
I've never liked hauling around big racks so I tend to not take a lot of gear. What I do take on the climb I expect to have at theend of the climb.
Ice climbing again and a LOT more gear on the harness.So I have two priorities, keep what I have for gear and just as importantly be able to manage the gear change overssafely, effortless and quickly. I want to do this on longer rock climbs as well as on alpine climbs.
Everyone rock and crag climbs these days. A 6 pitch rock climb even in the alpine isn't alpine climbing. What works in the gym might well work on a short alpine rock climb. But what works in the gym likely won't work wortha shit on an alpine climb all bundled up in several layers of clothing,big gloves and big boots and cold hands.
Clipping bolts on a short mixed climb...prefect use of the harness gear loops.
With the ability of most every one to climb water ice next to the road and "rock climb" right out of the parking lot...it is no wonder that the details get missed.
I've climbed with a number of guys that are new to the alpine. The more someone has sport climbed generally means the more they will want to rack gear on their harness. That might work...if you have tried it out previously with similar gear and in similar conditions. But you are just as likely to find your harness spits gear off the harness loops on a regular basis when you are wallowing in steep snow.
Ejection proof techniques for alpine climbingI generally climb everything short of WI5 with 8 or less ice screws. Twice I have ended up at a belay with 5 ice screws. My comment to that has been..."lose another and YOU lead EVERYTHING!" May be it is mytone.
I generally rack my ice screws on plastic racking biners in my harness for steep ice. On alpine stuff I may use the plastic racking biners for screws but I also always use a racking sling for the quick draws and rock gear. If I am only carrying a few short screws they maygo on the sling as well. The harness gear loops I keep for my personal gear likeprusiks, a locker or two, my belay plate or even a lwt shell.. Same stuff I will not be trading back and forth with my partner.
To be efficient, safe (as in less likely to drop) and fast, a gear sling makes sense.
I typically find the guys who are most adamant aboutusingtheir harness gear loops, because they hate gear slings, are the ones that "never drop" anything. And the same ones that shed gear on routelike it was free booty.
Hard free climbing at your limit mightwell take advantage of your harness' gear loops. Although it never did for me. Not likely many will be able to take advantage of that tiny performanceedgeif there is one while climbing alpine routes. I found it much better to be well organised with the right gear available, at the right time, on hard rock.I suspect moving faster and keeping the gear you started with will make a bigger difference in the alpine. Commercial gear slingswith winter clothing are comfortable as is afull size runner that does double duty as a gear sling.
When I am handingover gearat the belay, I do it one piece at a time. I make my partner do the same. I don't want afist full of wired stoppers or 3 pitons at once. I rack most pices one to a biner, wires and pitons the rare exception.Keeping it simple and structured for myself and my partner keeps the gear at hand. That keeps us both honest and our rackintact. Better yet I just have my partnerhand the entire rack on thegear sling or I take what is left of his gear sling rack (and throw it over my shoulder) sort it while on the slingand keep climbing depending on the leading plan.
Besides the full size runners I like to usethe Metolius gear sling. I have two and will loan my partners the second when required. It is adjustable but I don't adjust it even while using it in summer. Set it and for get it is my theory.
http://www.metoliusclimbing.com/adjustable_gear_sling.html
Mark Twight offers some good advice on racking gear in "Extreme Alpinism on page 175.
If you don't use a gear sling you should. It is faster, more efficient and the best way to keep your rack intact on alpine climbs. Seems to work well on trad rock too ;)
More here:
http://climbing.about.com/od/speedclimbing/a/SpeedTip9.htm
"To climb faster and save time at belay changeovers, rack all your climbing gear on a shoulder gear sling. The second climber coming up a pitch can easily rack the gear he cleans onto the gear sling rather than clipping it onto gear loops on his harness. When he reaches the belay anchor, all he has to do is take the gear sling off and hand it to the leader. There’s no time involved, it’s just a pure and simple hand-off like the passing of a baton in a relay race.
If you don’t do this, it takes lots of extra time to unclip each piece of gear from his harness and then hand it to the leader, who in turn has to re-rack it on his harness. By having it all racked together on a gear sling, you also avoid the possibility of dropping cams, nuts, and quickdraws during the hand-off. If there’s a difference in body size between your partner and you, then it’s a good idea to use an adjustable gear sling. Just make sure it’s easy and quick to adjust and that it won’t come apart, otherwise you’re screwed."
Adjustable sling? Better yet just make sure it fits the biggest body before you launch......adjusting a gear sling just adds another cluster to the equation.
No comments:
Post a Comment